Dynatrac EnduroSport® 3" Suspension Lift Kit System 6 for the 2018 and Newer Jeep Wrangler JL - JL30-1X5310-L6

The Dynatrac 3" Suspension Lift is designed for Jeep JK owners demanding the ultimate in performance and ride quality, without the larger stance you find in bigger lift systems on today's market.

• Adds 30% More Wheel Travel over Stock
• Dual Rate Coil Springs Front and Rear
• Includes High Performance Re-buildable / Re-valvable Dynatrac 2.0 EnduroSport shocks
• Level Stance Front to Rear
• Lifetime Guarantee that Coil Springs Won’t Sag
• Out Articulates Most Long Arm Kits of Comparable Height
• Vehicle can be Returned Back to Stock

Additional Detail

The Dynatrac 3" Suspension Lift System 6 for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. System 6 builds off of System 3 with upgraded 2.5 EnduroSport shocks for improved shock damping and heat dissipation. This system includes 3" lift dual rate coil springs, 2.5 EnduroSport shocks, tubular steel front lower links, adjustable front and rear track bars, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, Dynatrac was able to increase wheel travel numbers by 3" in front and 2" in the rear, significantly improving the performance of the 2018-UP JL. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise-free operation, maximum articulation, and minimal bind. The adjustable front and rear track bars ensure a properly centered axle with on-Jeep adjustability while also improving steering response with reduced deflection. Overall articulation is also improved by minimizing suspension bind. The 3.0” Lift System allows for fitment of 35" tires when used with Dynatrac's recommended wheel specifications. For users looking to install 37" tires, an optional extended bump stop spacer kit (Part # DT922029) is available.

Important Notes

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: 17x8.5" w/ 4.5” Backspace / -6mm Offset
• Recommended Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional extended bump stop spacer kit PN: DT922029)
• TECH NOTE: Springs are NOT rated for use with models equipped with EcoDiesel engines.
• TECH NOTE: Not compatible with Wrangler JL 4xe or Unlimited Rubicon 392 trims.

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.