Dynatrac EnduroSport® 3" Suspension Lift Kit System 4 for the 2007-2018 Jeep Wrangler JK - JK30-1X5310-L4

The Dynatrac 3" Suspension Lift is designed for Jeep JK owners demanding the ultimate in performance and ride quality, without the larger stance you find in bigger lift systems on today's market.

• Adds 30% More Wheel Travel over Stock
• Dual Rate Coil Springs Front and Rear
• Includes Adjustable Track Bars for Optimized Axle Positioning
• Includes High Performance Re-buildable / Re-valvable Dynatrac 2.5 EnduroSport shocks
• Level Stance Front to Rear
• Lifetime Guarantee that Coil Springs Won't Sag
• Out Articulates Most Long Arm Kits of Comparable Height
• Track Bars include Dual Stage Bushing System and JM12T Rod End to minimize deflection while maximizing responsiveness
• Vehicle can be Returned Back to Stock

Additional Detail

The Dynatrac 3" Suspension Lift is designed for Jeep JK owners demanding the ultimate in performance and ride quality, without the larger stance you find in bigger lift systems on today's market. Dynatrac's Jeep Wrangler JK 3" lift system is engineered with front and rear dual rate progressive wound springs which is the foundation for on and off-road performance and suspension articulation. The dual rate design gives you a softer initial rate for superb on-road comfort and a firmer secondary rate that increases during compression for excellent bottom-out control. Dynatrac 2.5 EnduroSport shocks add the finishing touch with OE mounting, aircraft-grade components, and vehicle-specific valving. Together the combination of Dynatrac dual rate coils and 2.5 EnduroSport shocks adds 30% more wheel travel over stock, helping you rock crawl safer or soak up larger terrain at higher speeds keeping those wheels on the ground. Adjustable track bars are included front and rear for optimizing axle position to ensure your axles are perfectly centered under the vehicle. This Dynatrac 3" JK lift system is designed from the ground up to give the 07-18 Jeep Wrangler JK's the best performance, suspension handling/ride quality, and clearance for 33" tall tires (35" tall with installation of aftermarket high-clearance fenders).

Important Notes

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: 17x8.5" w/ 4.5" Backspace / -6mm Offset
• Recommended Aftermarket Tires: 33" x 11.50" (Larger 35" tire packages will fit with minor modifications or aftermarket high clearance fenders, test fitment recommended)
• TECH NOTE: Dynatrac's advertised lift heights are based around a typical Jeep JK build which usually includes added weight of accessories such as heavier front bumper/winch and heavier rear bumper/spare tire. Lift heights may be higher than advertised if installed on a stock-weighted vehicle.
• TECH NOTE: 2012-2018 JK models require use of Dynatrac Exhaust Extension Spacer, part # DT922011, or an aftermarket front drive shaft, Dynatrac part # DT922014.
• TECH NOTE: 2-door models sit slightly taller than 4-door models but remain level when installed.
• TECH NOTE: May require front and rear alignment cam kits, Dynatrac part # DT922013.
• TECH NOTE: Spanner wrench available to aid in track bar length adjustment. Part # DT9191014.

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.