Product Code: JL30-1X5310-L1

Dynatrac EnduroSport® 3" Suspension Lift Kit System 1 for the 2018 and Newer Jeep Wrangler JL - JL30-1X5310-L1

$1,570.00
In Stock - Ships Within 1-2 Business Days

The Dynatrac 3" Suspension Lift System 1 is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. Made for adding lift height and wheel travel to the JL without breaking the bank.

  • 100% bolt-on system makes for an easy install
  • 2.0 EnduroSport shocks with Jeep JL specific valving
  • 3" front, 2" rear increase in wheel travel
  • 3" lift height over stock
  • Dual-rate coil springs with a lifetime guarantee against sagging/breakage
  • Fits 35" tires (37" with optional extended bump stop spacer kit, Part # DT922029)
  • Improves on and off-road ride quality over stock
  • Tested under rigorous off-road conditions to validate tune, performance, strength, and durability

Additional Detail

The Dynatrac 3" Suspension Lift System 1 for the 2018-UP Jeep Wrangler JL is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. System 1 is Dynatrac's entry-level offering for Jeep enthusiasts looking to add lift height and wheel travel to their JL without breaking the bank. This system includes 3" lift dual rate coil springs, 2.0 EnduroSport shocks, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, Dynatrac was able to increase wheel travel numbers by 3" in front and 2" in the rear, significantly improving the performance of the 2018-UP JL. The 3.0" Lift System allows for fitment of 35" tires when used with Dynatrac's recommended wheel specifications. For users looking to install 37" tires, an optional extended bump stop spacer kit (Part # DT922029) is available.

Important Notes

  • OEM Wheels & Tires Fitment: Yes
  • Recommended Aftermarket Wheels: 17x8.5" w/ 4.5" Backspace / -6mm Offset
  • Recommended Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional extended bump stop spacer kit PN: DT922029)
  • TECH NOTE: Springs are NOT rated for use with models equipped with EcoDiesel engines.
  • TECH NOTE: Not compatible with Wrangler JL 4xe or Unlimited Rubicon 392 trims.

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
N.A.
N.A.