Dynatrac EnduroSport® 2" Suspension Lift Kit System 2 for the 2018 and Newer Jeep Wrangler JL - JL20-1X5310-L2

This Dynatrac 2" Suspension Lift System 2 produces two inches of lift to clear taller tires with zero cutting and zero rubbing. Get the bold off-road looks and capability you want without negatively affecting handling and ride comfort.

• 100% bolt-on system makes for an easy install
• Easily fits 35-inch tires on Sport or Sahara models
• Features 2.0 EnduroSport shocks with Jeep JL specific valving
• Fits 2018-up Jeep Wrangler JL 4-Door with 3.6-liter V6
• Fits 37-inch tires on Rubicon models or any high fender flare rig
• Produces 2 inches of lift
• Tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind

Additional Detail

The Dynatrac Suspension 2" Lift System 2 for the 2018-Up Jeep Wrangler JL produces two inches of lift, the perfect amount to clear taller tires with zero cutting and zero rubbing. Get the bold off-road looks and capability you want without negatively affecting handling and ride comfort. The suspension system produces two inches of lift and easily accommodates 35-inch tires on Sport or Sahara models, and 37-inch tires on Rubicon models or other models equipped with high fender flares. The centerpieces of the kit are the Dynatrac coil springs and Dynatrac 2.0 EnduroSport Internal Reservoir shocks. Specifically tuned to the kit's Dynatrac springs, the 2.0 EnduroSport shocks are a high-pressure nitrogen design with internal reservoirs that features a 5/8-inch shaft, high-flow piston, and 6061-T6 aluminum construction for low weight and the highest possible heat dissipation and corrosion resistance. The front lower links included with this system are constructed from thick wall steel tubing, provide increased caster numbers, and feature dual durometer bushings for noise free operation, maximum articulation, and minimal bind. The kit also includes laser-cut brake line extension brackets, sway bar links, and bump stop extensions.

Important Notes

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: 8.5 Wide, 4.50" Backspace, -6mm Offset
• Recommended Aftermarket Tires (Non-Rubicon): 35" x 12.50" (37 x 12.50 with fender trimming or high clearance fenders)
• Recommended Aftermarket Tires (Rubicon): 37" x 12.50"
• TECH NOTE: This Dynatrac EnduroSport suspension lift kit has not been tested on, and is not recommended for use on 2-door Jeep Wranglers, or any models with powertrain other than the 3.6-liter V6 gasoline engines. This package does not fit Jeep Wrangler Rubicon 392 or 4xe models.

WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.