BulletProof
BulletProof 2.0" Light Duty Drop/Rise Hitch Steel
BulletProof 2.0" Light Duty Drop/Rise Hitch Steel
SKU:
Couldn't load pickup availability
2.0" Light Duty 2" Drop/Rise Hitch
2.0" Light Duty 4" Drop/Rise Hitch
With 4 ride heights, you can rest assured that you will be towing level when using your BulletProof Hitch®. It is the perfect choice for vehicles with a receiver height of 18"-19" (ground to the bottom of the receiver tube).
2.0" Light Duty 6" Drop/Rise Hitch
With 5 ride heights, you can rest assured that you will be towing level when using your BulletProof Hitch®. It is the perfect choice for vehicles with a receiver height of 20"-21" (ground to the bottom of the receiver tube).
5/8" BulletProof Locking Pin
The BulletProof Locking Pin is made from stainless steel to provide maximum corrosion and rust protection. The length of the pin works with all 2", 2.5", & 3" hitch receivers. It can also be used to secure the dual ball or other BulletProof accessories into the hitch channel.
Our locking pin features a 2” & 2.5” anti-rattle stabilization spacer to prevent side to side movement.
This top-of-the-line locking pin has a universal fit. With 4" of usable length, it is compatible with any vehicle and any hitch on the market.
The BulletProof Locking Pin is rated to the max capacity of the hitch 14,000 - 36,000lbs and offers peace of mind when leaving your vehicle unattended. The thick, lockable barrel (end-piece) helps to prevent theft as well as provide a solid hold on your hitch.
2" BulletProof Anti-Rattle Clamp
BulletProof Hitches® are manufactured to a very tight tolerance of +/- .010 of an inch. Unfortunately, hitch receivers cannot always live up to these standards. Tolerances can vary as much as .100 of an inch and could cause some unwanted movement or rattle in the hitch.
To solve this, we have developed the 2" BulletProof Anti-Rattle Clamp. It allows you to tighten the hitch to the receiver and eliminate all movement. Our Anti-Rattle clamp is made from 1/2" thick pressed brake steel and features our signature black, textured powder coat.
Installation is simple - just slide the hitch through the clamp, insert the hitch into the receiver, tighten the bolt and then tighten the jam nut with a wrench to eliminate movement inside the receiver.
*Torque specification on the bolt is 40ft-lbs.*
*Note: Anti-Rattle Clamp is NOT compatible with weight distribution systems




