Search results for: 'Ball joint jeep jt'

This Dynatrac™ installation kit makes installation of the Dynatrac HD Balljoints™ easier. This kit is for use with JP44-2X3050-E ball joint sets for Jeep Wrangler JL and Gladiator JT applications. Learn More

The Dynatrac ProRock 44™ for the 2018 and newer Jeep Wrangler JL and 2020 and current Gladiator JT has significantly stronger axle tubes and end forgings. This serious upgrade in strength and durability, along with the elimination of the Front-Axle Disconnect (FAD), provides JL owners with the Confidence to Explore® and the ability to run tires up to 38-inches tall without fear.

The ProRock 44™ is a direct replacement housing for the Jeep JL and JT front axle. It is available in two widths to match the stock axle widths in Sport/Sahara/Overland models, as well as the wider Rubicon model. This axle is significantly stronger than the factory Dana 44, addressing the critical areas that fail when larger tires are installed and the vehicle is used regularly off-road.

Learn More

Rebuild kit for Dynatrac HD Balljoints™ for JP44-2X3050-E Balljoints for 2018-current Jeep Wrangler JL and 2020 - Current Jeep Gladiator JT

Learn More

Complete set of patented, made-in-the-USA, rebuildable, Dynatrac HD BallJoints™ for 2018-Current Jeep Wrangler JL and 2020-Current Jeep Gladiator JT. Fits stock front axle or Dynatrac ProRock 44™ for Jeep JL/JT applications.

Learn More

This Dynatrac™ installation kit makes installation of the Dynatrac HD Balljoints™ easier. This kit is for use with JP44-2X3050-A, JP44-2X3050-C and JP44-2X3050-D ball joint sets for Jeep Wrangler JK applications. Learn More

The Dynatrac Serious Performance Extreme Axle Set pairs the Dynatrac ProFloat XD60 rear axle with the Dynatrac ProRock 44 front axle for unprecedented durability and strength, and with more ground clearance than any other axle housings in their class. Never before have these two axles been available as a package set.

Learn More

Everyone else’s full-float axle just became obsolete. The Dynatrac ProFloat XD60™ is a proprietary system of axleshaft, housing and bearing technology that virtually eliminates axle-flange bending, even with tires up to 40-inches in diameter. This ProFloat XD60 is a direct bolt-in for the 2020-and-newer Jeep Gladiator (JT).

Dynatrac has once again rewritten the rulebook of axle strength and durability. With the introduction of the ProFloat XD60 axle, customers can now have the strength of a full-float rear axle without the heavy weight and the need to change wheels. 

Learn More

The Hard Core Plus ProRock XD60®/XD60 Axle Set™ is for Jeep Gladiator JT 2020 - Current owners who want more than just “one-ton” axles. This axle set delivers Dynatrac ProRock XD60® technology front and rear. Unbeatable durability with more axle rigidity to better hold proper gear mesh under extreme loads. The exclusive Dynatrac 1550LT® wheel ends provide tighter turning, less locker bind when turning, reduced steering effort and less wear-and-tear on steering components. And both axles offer best-in-class ground clearance.

Learn More

The Elite™ ProRock XD60®/80 Axle Set is for Jeep Gladiator JT owners who will not settle for anything less than the very best drivetrain durability, quality and extreme performance for running tires in diameters from 37- to 44-inches. If you are a highly experienced and skilled off-road driver who regularly engages in very technical off-roading with their friends and family, you enjoy taking on the hardest trails and the most difficult and challenging obstacles, this is the Axle Set for you.

Learn More

Complete set of patented, made-in-the-USA, rebuildable, Dynatrac HD BallJoints™ for 2007-2018 Jeep Wrangler JK and 1999-2004 Jeep Grand Cherokee (WJ). these are knurled balljoints that fit a stock front axle or Dynatrac ProRock 44™ for Jeep JK applications. Learn More