Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

All-New DHD Drag Link Sleeve™ from Dynatrac

The all-new DHD Drag Link Sleeve™ from Dynatrac replaces the Jeep Wrangler JK adjustment sleeve on the drag link, a weak component that is prone to failure on lifted Jeeps. The DHD Drag Link Sleeve provides more length, more adjustment and is more than twice as strong as the factory sleeve. The DHD Drag Link Sleeve is made in the USA.

The factory drag link adjustment sleeve works well in stock applications. But the additional stress of suspension lifts and larger tires often lead to the failure of this component. Once buckled or fractured, the factory sleeve must be replaced and will immediately disable the vehicle. Additionally, it is common to lengthen the drag link when installing a suspension lift. The thin wall and slotted structure of the stock sleeve becomes even weaker as it is extended, and becomes more prone to buckling and fracture.

The Dynatrac DHD Drag Link Sleeve replaces the stock sleeve on a factory JK drag link, substantially improving overall drag link durability. This provides lifted JKs with a very low cost, stronger drag-link option. The factory drag link is made from high-quality steel and is rigorously tested. Very few aftermarket steering linkage components are US-made or superior to the stock steering linkage.

The DHD Drag Link Sleeve from Dynatrac provides the additional drag-link length often needed to center the steering wheel in a Jeep Wrangler JK. The extra adjustment of the Dynatrac DHD sleeve allows JK owners to get the maximum travel out of the factory steering gear to achieve optimum maneuverability in tight off road obstacles, as well as everyday parking situations. The DHD sleeve is machined from billet 4130 heat-treated chromoly steel, and it is precision threaded to mate with the stock drag link components. It comes complete with heavy-duty clamps to form a single, rigid drag-link assembly ready to handle those hard rock obstacles.

For more than 25 years, Dynatrac has been the industry leader in high-performance axle and drivetrain assemblies. Dynatrac products are designed using the finest materials, processes and engineering available, and its products are backed by the best service and warranty in the business. From complete replacement ProRock® axle assemblies to high-quality replacement and upgrade components, Dynatrac is committed to delivering the best performance, reliability and quality possible.