Account confirmation is required. Please, check your email for the confirmation link.
First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
The Dynatrac ProRock 44™ for the 2018 and newer Jeep Wrangler JL and the 2019 and newer Jeep Gladiator JT has significantly stronger axle tubes and end forgings. This serious upgrade in strength and durability, along with the elimination of the Front-Axle Disconnect (FAD), provides JL and JT owners with the Confidence to Explore® and the ability to run tires up to 38-inches tall without fear.
The ProRock 44™ is a direct replacement housing for the Jeep JL front axle. It is available in two widths to match the stock axle widths in Sport/Sahara/Overland models, as well as the wider Rubicon model. This axle is significantly stronger than the factory Dana 44, addressing the critical areas that fail when larger tires are installed and the vehicle is used regularly off-road.
Here are the features and specifications of the Dynatrac ProRock 44™ for the Jeep JL and JT:
Heavy-duty 3.125-inch diameter axle tubes with .500-inch wall thickness; This is the same tubing we have used on our ProRock 60® axles for 30 years!
Patented ProRock® shape delivers the best ground clearance - PERIOD
The strongest end forgings, made by Dynatrac in the USA
The new ProRock 44™ eliminates the FAD
Rock-proof nodular-iron Dynatrac differential cover included
New upper suspension bushings already installed
Laser cut suspension brackets that are thicker and stronger than factory
Uses the proven Next-Gen JK 44 ring and pinion and lockers designed for the JK
Entire axle housing is manufactured in the USA
Exclusive Dynatrac no-fault, 12-month and unlimited-mileage warranty
You may choose to purchae a ProRock 44 housing and add a locker, gears and inner axleshafts yourself, or add optoins found in our configurator to receive an assembled ProRock 44.
Dynatrac Part Numbers for Reference:
JL44-1X3010-A ProRock 44 Front Housing, Extra Caster, 67.9" Width, NO Ball Joints, JL Wrangler & JT Gladiator Rubicon JL44-1X3010-E ProRock 44 Front Housing, Extra Caster, 67.9" Width, OEM Ball Joints, JL Wrangler & JT Gladiator Rubicon JL44-1X3010-C ProRock 44 Front Housing, Stock Caster, 67.9" Width, NO Ball Joints, JL Wrangler & JT Gladiator Rubicon JL44-1X3010-F ProRock 44 Front Housing, Stock Caster, 67.9" Width, OEM Ball Joints, JL Wrangler & JT Gladiator Rubicon JL44-1X3010-B ProRock 44 Front Housing, Extra Caster, 66.4" Width, NO Ball Joints, JL Wrangler & JT Gladiator Sahara/Sport/Overland JL44-1X3010-G ProRock 44 Front Housing, Extra Caster, 66.4" Width, OEM Ball Joints, JL Wrangler & JT Gladiator Sahara/Sport/Overland JL44-1X3010-D ProRock 44 Front Housing, Stock Caster, 66.4" Width, NO Ball Joints, JL Wrangler & JT Gladiator Sahara/Sport/Overland JL44-1X3010-H ProRock 44 Front Housing, Stock Caster, 66.4" Width, OEM Ball Joints, JL Wrangler & JT Gladiator Sahara/Sport/Overland
About 8,000 miles in to my journey with the JL Wrangler we swapped out the weak 44 (with FAD) my JL Rubicon came with for one of these awesome units from Dynatrac. I’ve done over 20,000 miles with this axle through some of the toughest terrain the western United States offer. 2 trips to Moab, Colorado, ran through the Rubicon, and many trails in Southern California. This axle has taken some hits that I know would have had devastating consequences if I still had the front axle disconnect. Worth every penny!
Review by California Roamer /
(Posted on 10/12/2019)