×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

ProRock 44/60 Hybrid™

ProRock 44/60 Hybrid™

 

The Dynatrac ProRock44/60 Hybrid™ offers all of the advantages of the ProRock 44™ plus the advantage of Dynatrac Pro60® axleshafts, knuckles, fixed spindles, 1480 steering joints and hubs. This provides the unbeatable ground clearance of a Dynatrac ProRock 44 and the axleshaft and outer-end strength of a ProRock 60! Add the strength of a Dynatrac Pro 60 at the ends of an ultra-high ground clearance ProRock 44. Dynatrac TJ axles include exclusively designed ABS and stability control sensor mounts to maintain all factory function of these systems.

ProRock 44/60 axles are available with either Warn or optional Dynatrac DynaLoc™ locking hubs. When you use the Dynaloc locking hubs with our exclusive Stub Hub kit, the overall package is 4.75-inches narrower. That means that the hubs tuck into the wheels better with 2.388-inches per side.

Check out these standard features:

  • The most ground clearance of any 44-based axle
  • 35-spline, 1 ½-inch induction-hardened axleshafts with 1480 steering joints
  • Patented ProRock44™ design
  • Dynatrac Pro Series 60 heavy duty ends package (Larger knuckle, shaft, spindle, brakes, and internal hub)
  • ABS retrofit @ wheel ends
  • Rock-proof nodular-iron Dynatrac™ diff cover included
  • Alloy-steel end forgings with Dynatrac HD BallJoints™ installed in front axle assemblies
  • Available in standard and custom widths, caster and pinion angles
  • Made in the USA
  • Exclusive Dynatrac 1-year no-fault, unlimited-mileage warranty
  • 8.8-inch ring gear diameter
  • Choice of ring and pinion ratio
  • ARB locking differential
  • Input yoke - 1310 (U-bolt style)
  • Dynatrac TJ heavy duty coil spring suspension bracket set (Includes heavy duty brackets and installation)
  • Upgraded disc brake assemblies
  • Wheel bolt pattern - 5x5.5, 6x5.5 or 8x6.5 available
  • Warn Premium heavy duty 35-spline manual locking hub assemblies

 

Optional Equipment:

  • ARB air compressor kit
  • 35 spline, 1½”diameter alloy outer axle shaft assemblies w/Warn Premium 35 spline locking hubs upgrade
  • Competition 4340 Chromoly 35 spline axle shaft upgrade (Includes 4340 inners & outers + 2 CTM joints)
  • 5x5.5” Dual Piston 13.25” Vented Rotor “Big Disc” Brake upgrade - *Min. 17” wheel required
  • 5x5.5” Wilwood 6 Piston 14” Rotor Disc Brake Pkg. - *Min. 17” wheel required
  • 8x6.5” Dual Piston, 14.50” Vented Rotor “Big Disc” Brake Upgrade - *Min. 17” wheel required
  • 1350 Yoke (U-bolt style)
  • Braided stainless steel brake hose kit (To be sent after axle is installed due to length requirement)
  • Reid Racing King Pin End-Forging & Knuckle Substitute Assy. - 5, 6 and 8 lug
  • Dynatrac 30 or 35 spline full-time 4WD drive gears
  • Dynatrac DynaLoc™ Heavy Duty Manual Locking Hubs - Upgrade
  • Dynatrac Stub-Hub Conversion Kit - Upgrade
  • NEW! – Dynatrac Heavy Duty Ball Joint Upgrade (Uppers & Lowers)
  • Dynatrac Heavy Duty Cross-Over Steering Assembly (Tie Rod & RH Steering Arm – Reuse Drag Link
  • Powder coat finish (Color TBD by customer)
  • Axle installation (Estimated Labor)

There are no products matching the selection.